SIBRILLE's tree lamp has a three-light design with rotating heads, a 36W LED output that the maker compares to a 200W incandescent, remote and touch control, an individual switch and four colour temperatures with dimming. Having both remote and touch control matters, because a remote is easily lost and a touch panel stays with the lamp.
Four colour temperatures let you choose warm for evenings and cooler for daytime, and the three heads let you split light between a wall and a reading chair. The tradeoff is the LED panels: integrated LEDs cannot be replaced, so when the driver or a panel fails, the lamp is done, which makes warranty length the practical signal. Against the farmhouse Edison lamp, the SIBRILLE is brighter and controllable but not serviceable. Against the Hotsonic, it is more functional but less decorative.
Assemble the pole sections on the floor and tighten every joint before standing the lamp. Place the base on a flat surface, away from heavy foot traffic. Aim one head up for ambient light, and the other two toward the sofa and a wall. Avoid covering the heads or placing them near curtains. Dust the heads with a dry cloth, and check the base screws after a month.
What works
- Remote and touch control mean a lost remote does not strand the lamp
- Four colour temperatures and dimming suit mornings and evenings
- Three rotating heads aim light at the wall, ceiling or a chair
- A 36W LED output gives strong light for a floor lamp
Watch out for
- Integrated LED panels cannot be replaced when they fail
- A tall three-head lamp needs a stable spot away from foot traffic
Specs
- Power
- 36W LED, equal to about 200W incandescent per the maker
- Heads
- 3 lights, each rotating
- Control
- Remote and touch, individual switch
- Colour
- 4 colour temperatures
- Dimming
- Dimmable






