Amazon affiliate links - we earn a commission.Affiliate disclosure

Buying guide · 11 min read · Updated 2026-11-21

Best Remote Control Caddies (2026)

Six remote control caddies compared on capacity, compartment layout, wood, leather and wall-mount designs, stability and fit for coffee tables and sofa arms.

Elena Hart, Lead Home EditorBy Elena HartLead Home Editor6 picks comparedSpec-sheet verified
Best Remote Control Caddies

At a glance

Our top picks

Side by side

Spec comparison

A remote control caddy is the smallest piece of living room storage, and it solves one of the most common daily annoyances: remotes wandering under cushions and behind the sofa. A good caddy gives each remote a home within reach of the seat.

Caddies split into table-top holders, rotating organizers and wall-mounted brackets, and they differ in how many remotes they hold and how stable they are. This guide compares six models on capacity, layout and materials so you can match one to your table, your wall and your stack of remotes.

Before you buy

6 Criteria to Look For Before Buying a Remote Control Caddy

  1. 01

    Number of remotes

    Count every remote in the room, including streaming sticks, soundbars, fans and lights. A two-slot holder like the DRASTAR holds four to six, while the GIGIFTREE holds up to fifteen. The most common mistake is buying small and then adding a second caddy within a month.

  2. 02

    Table, arm or wall

    A table caddy needs flat space, a wall holder like the TotalMount needs a smooth wall, and an armrest caddy needs the right armrest width. Pick the spot you reach for most when you sit down. A caddy in the wrong place is a caddy nobody uses.

  3. 03

    Compartment layout

    Slots should match the shape of your remotes, since slim soundbar remotes and chunky cable box remotes need different widths. The MaxGear has two wide and two narrow compartments. Open slots, as on the GIGIFTREE, suit mixed sizes.

  4. 04

    Stability and base

    A light caddy with one remote can slide or tip. A weighted wood or metal base, as on the GIGIFTREE, or an anti-slip base, as on the MaxGear, helps. Soft vegan leather like the FINTIE needs a flat surface.

  5. 05

    Material and look

    Wood suits warm, traditional rooms, leather suits modern ones and metal suits industrial looks. Material also changes how well the caddy handles a spill and a scratch. Match the finish to your coffee table.

  6. 06

    Extras and storage

    A drawer, as on the First-zgel, hides batteries and small items. An open slot for a tablet or phone adds use. Extras add cost, so pick the one you will actually use.

Detailed reviews

The 6 best remote control caddies, explained

01
GIGIFTREE 9-Slot Farmhouse Remote Control Holder, Metal and Wood, Large Size
9 slotsHolds 9 to 15 remotesMetal and woodOpen slot
Check price on Amazon
Best for: Homes with many remotes that want one visible, organized spot.

GIGIFTREE's caddy is built from metal and wood with nine slots that the maker says hold between nine and fifteen remotes, plus an open slot wide enough for a tablet, phone or laptop. It is designed for TV, DVR, Blu-ray, Roku and Apple TV remotes, and the laser-etched word REMOTES on the front gives a farmhouse look.

The tradeoff is size and cost: it sits at the top of the group's cost range and takes a large area on a coffee table or a console. Compared with the DRASTAR two-slot holder, it holds many more remotes but looks like a piece of furniture. Against the MaxGear rotating caddy, it holds more but does not turn to reach each slot.

Place it on a stable table at a spot you can reach from the sofa, and sort remotes by device. Keep the open slot for a tablet and a charger. Wipe with a dry cloth, and check the wood joints once a year. In year three, expect small scratches on the wood and a slightly looser metal frame, which a quick screw tightening fixes.

What works

  • Nine slots hold up to fifteen remotes of different sizes
  • An open slot holds a tablet, phone or laptop as well
  • A metal and wood build adds weight and stability
  • Farmhouse styling suits a living room coffee table

Watch out for

  • Top cost tier and a large footprint on a small table
  • Rustic styling will not suit a sleek modern room

Specs

Capacity
9 to 15 remotes
Slots
9 slots plus an open slot for tablets
Material
Metal and wood
Style
Farmhouse with REMOTES etching
Cost tier
Top of the group
02
DRASTAR Wood TV Remote Holder, 2 Compartments, Handmade Solid Wood, Black
2 slots2 to 3 remotes eachSolid woodBlack
Check price on Amazon
Best for: Small tables with two or three remotes to organize.

DRASTAR makes a compact two-compartment holder from handcrafted solid wood in black. Each compartment holds two to three remotes, so it suits a TV remote, a streaming remote and a soundbar remote in one small block. The maker also pitches it for office items like pens and phones.

The tradeoff is capacity: two compartments will not hold a big remote collection, and a light wooden block can slide if it holds only one thin remote. Compared with the GIGIFTREE, it is far smaller and cheaper, but holds fewer. Against the First-zgel pine holder with a drawer, it has no closed storage.

Place it on a side table or arm of a chair, and keep the heavier remote in the back slot so the block does not tip. Wipe with a dry cloth. In year three, the black finish can show scuffs at the edges, so a dab of matching paint or wax helps. A small foam pad under the base stops sliding on glass.

What works

  • Solid wood construction is sturdier than thin plastic holders
  • Two compartments hold two to three remotes each
  • A compact size fits a small side table
  • Lower middle cost tier makes it easy to try

Watch out for

  • Capacity is small for a home with many remotes
  • A light block can slide when nearly empty

Specs

Slots
2 compartments
Capacity
2 to 3 remotes per slot
Material
Solid wood, handmade
Finish
Black
Cost tier
Lower middle of the group
03
MaxGear 360 Degree Rotating Wooden Remote Caddy, 4 Compartments, Anti-Slip Base
4 compartments360 degree rotationAnti-slip baseWood
Check price on Amazon
Best for: Coffee tables where you want every remote within a quick spin.

MaxGear's caddy is a wooden organizer with four compartments, two wide and two narrow, mounted on a rotating base with an anti-slip bottom. The rotation lets you spin the caddy to reach any remote from the sofa without picking it up, which is a clever answer to the problem of reaching into the back slot.

The tradeoff is that a rotating base adds a small moving part, and the caddy sits at the upper middle of the group's cost range. Compared with the GIGIFTREE, it holds fewer remotes but turns. Against the DRASTAR, it adds rotation and two more compartments.

Place it in the middle of the coffee table so you can spin it with one hand. Put the remotes you use daily in the wide slots and small items in the narrow ones. Wipe with a dry cloth and keep the bearing clean of crumbs. In year three, the rotation can get slightly stiff if debris collects, and a wipe of the base solves it.

What works

  • A 360 degree rotating base brings every compartment to you
  • Two wide and two narrow slots suit remotes and small items
  • An anti-slip base keeps it steady on a glass or wood table
  • Wooden build fits a range of living room styles

Watch out for

  • A rotating bearing is one more part to wear or stiffen
  • Holds fewer remotes than the big nine-slot caddy

Specs

Compartments
4 (2 wide, 2 narrow)
Rotation
360 degrees on an anti-slip base
Material
Wood
Use
Remotes and desk essentials
Cost tier
Upper middle of the group
04
First-zgel Solid Pine Remote Control Holder with Drawer, 6.2 by 3.9 by 5.2 Inches
6.2 in wide3.9 in deep5.2 in tallSolid pine
Check price on Amazon
Best for: A small console or nightstand that wants hidden storage for batteries and small items.

First-zgel's remote holder is handcrafted from solid pine, measures 6.2 by 3.9 by 5.2 inches and includes a small drawer beneath open remote slots. The drawer hides things that do not belong on show, such as batteries, a stylus or a spare key, and the natural grain finish adds warmth to a media console.

The tradeoff is size and cost: it is the smallest unit here by footprint, yet sits at the upper end of the cost range because of the drawer and solid wood. Compared with the DRASTAR, it adds closed storage but holds a similar number of remotes. Against the MaxGear, it is neater but does not rotate.

Place it where it will not be knocked, since the drawer slides out. Keep batteries and small items in the drawer and the day-to-day remotes in the open slots. Wipe with a dry cloth and avoid damp spots, which can swell pine. In year three, the drawer may rub slightly, which a dab of candle wax on the runners smooths.

What works

  • A small drawer hides batteries, keys and other small items
  • Solid pine adds a natural wood look and sturdy feel
  • Open slots keep daily remotes in easy reach
  • A compact footprint fits a media console corner

Watch out for

  • Upper end cost tier for a small holder
  • Only a few remotes fit before the slots are full

Specs

Size
6.2 in by 3.9 in by 5.2 in
Material
100 percent solid pine
Storage
Open slots and a drawer
Finish
Natural grain
Cost tier
Upper end of the group
05
FINTIE Vegan Leather Remote Control Holder with 6 Compartments, Desktop Caddy
Vegan leather5 to 6 compartments7.87 in longTwo sizes
Check price on Amazon
Best for: Glass or polished tables where a soft base will not scratch.

FINTIE sells a vegan leather remote holder with several compartments in two sizes, a small at 7.87 by 2.95 by 3.93 inches and a large at 7.87 by 3.93 inches wide. It is pitched for coffee tables, couches, armchairs and nightstands, and the soft surface will not scratch a glass or wood table.

The tradeoff is structure: soft-sided leather bends and can lean, and compartments may sag if a remote is heavy. Compared with the DRASTAR, it costs less and is lighter but less sturdy. Against the GIGIFTREE, it is smaller and holds fewer remotes.

Place it on a stable surface and pick the large size if you have chunky remotes. Wipe with a damp cloth and avoid direct sun, which can fade or crack vegan leather. In year three, check the seams and edges for peeling, since synthetic coatings can flake in sun or at the corners.

What works

  • A soft surface protects glass and polished wood tables
  • Two sizes let you match chunky or slim remotes
  • Several compartments separate remotes from small items
  • Lower middle cost tier is easy to replace

Watch out for

  • Soft walls lean and sag with heavy remotes
  • Vegan leather can crack or flake with sun and age

Specs

Material
Vegan leather
Compartments
Several, for remotes and small items
Small size
7.87 in L by 2.95 in W by 3.93 in H
Large size
7.87 in L by 3.93 in W by 3.93 in H
Cost tier
Lower middle of the group
06
TotalMount Drop-Free Remote Holder, Removable Adhesive Strips, XL Black
Wall mount3 to 4 remotesNo drillingXL size
Check price on Amazon
Best for: Households that want the table clear and remotes in a fixed spot.

TotalMount's wall holder takes remotes off every surface by mounting on the wall beside the TV or sofa, with removable adhesive strips and screws if you prefer to drill. It holds three or four remotes in an extra large pocket, and the drop-free design keeps remotes from falling out when pulled.

The tradeoff is placement: a wall mount must sit near where you sit, and adhesive strips can fail on textured or painted walls. Compared with the table caddies, it frees surface space but cannot hold a tablet or small items. Against the GIGIFTREE, it holds fewer but takes no table space.

Choose a smooth, clean wall near the sofa, press the strips firmly and wait an hour before loading. Use the screws on textured walls or if remotes are heavy. Clean the surface with a dry cloth. In year three, check the adhesive and retighten screws, and keep it out of damp or hot spots that weaken the strips.

What works

  • Wall mounting frees the coffee table of clutter
  • A drop-free design stops remotes falling out
  • No drilling is required, but screws are included for walls that need them
  • Holds three or four remotes in one XL pocket

Watch out for

  • Adhesive strips can fail on textured or painted walls
  • Cannot hold a tablet or small items

Specs

Type
Wall-mounted holder
Capacity
3 or 4 remotes
Mounting
Removable adhesive strips, screws included
Size
XL
Cost tier
Upper middle of the group

Spec decoder

What the listing measurements really mean

The numbers brands lead with, translated into what they tell you about fit, comfort and wear at home.

Remote capacity

This is how many remotes the manufacturer says the caddy holds. It depends on remote size.

Watch forThe GIGIFTREE lists 9 to 15 remotes; the DRASTAR lists 2 to 3 per slot.

Compartment width

Compartment width decides which remotes fit. Slim remotes slip through wide slots.

Watch forThe MaxGear lists two wide and two narrow compartments.

Anti-slip base

A rubber or textured base stops sliding on glass and polished wood.

Watch forThe MaxGear lists an anti-slip base; check others for pads.

Adhesive strip mounting

Removable strips stick to the wall without drilling. They hold best on smooth, clean paint.

Watch forThe TotalMount includes strips and screws for textured walls.

Material

Solid wood, pine, leather and metal each handle weight and scratches differently.

Watch forThe First-zgel is solid pine, the FINTIE is vegan leather.

Methodology

How We Evaluated These Remote Control Caddies

Capacity and layout

We compared capacity claims from two compartments on the DRASTAR to nine slots on the GIGIFTREE. We looked at how slots match remote sizes. We did not test any caddy.

Stability

We read base and material details, from weighted wood to anti-slip pads and soft leather. A caddy that slides is a daily irritation. We favoured stable bases.

Material and finish

We looked at solid wood, pine, vegan leather and metal and wood. Each handles scratches, sun and spills differently. We favoured materials that match common coffee tables.

Mounting and placement

We compared table, rotating and wall-mounted designs. The TotalMount frees surface space, the MaxGear spins. We favoured designs that fit the sofa reach.

Owner feedback patterns

We researched common themes: caddies that are too small, sliding bases and adhesive strips that fail. These shape our cons. We did not use ratings or review counts.

Decision guide

How to Choose the Right Remote Control Caddies

By Number of Remotes

SituationPickWhy
Two or three remotesDRASTAR 2 slotCompact and sturdy
Three or four remotesTotalMount wall holderXL pocket
Four to six remotesMaxGear rotatingFour compartments that spin
Many remotes and a tabletGIGIFTREE 9 slotHolds up to fifteen
A few remotes and small itemsFirst-zgel with drawerDrawer for batteries

By Budget

SituationPickWhy
Lower middleDRASTAR or FINTIESmall wood or leather
Upper middleMaxGear or TotalMountRotating or wall mount
Upper endFirst-zgel with drawerSolid pine and a drawer
Top of the groupGIGIFTREE 9 slotLargest capacity
Best value overallDRASTARSolid wood at a modest tier

Table vs Wall

Table

The GIGIFTREE, MaxGear and DRASTAR sit on a coffee table. They hold more and can take other items, but use surface space.

Wall

The TotalMount frees the table and fixes a spot for remotes. It holds fewer and relies on adhesive or screws.

Pick a table caddy for flexibility and a wall holder if the coffee table is already crowded.

By Style

SituationPickWhy
FarmhouseGIGIFTREEMetal and wood with etching
Natural woodFirst-zgel or DRASTARPine or solid wood
Modern soft lookFINTIEVegan leather
FunctionalMaxGearRotating base
MinimalTotalMountBlack wall holder

For Living Room Use Specifically

Look for

A caddy within reach of the main seat, slots that fit your remotes, a stable base and a finish that suits your table.

In this comparison

The GIGIFTREE and MaxGear suit coffee tables, while the TotalMount and First-zgel suit tidy consoles and walls.

When to Spend More

Spend more if

You have many remotes, want a drawer or want furniture-level wood like the GIGIFTREE or First-zgel.

Save if

You have two or three remotes, where the DRASTAR or FINTIE is enough.

Ownership

Maintenance schedule

The upkeep that decides whether a piece still looks good in year five.

TaskIntervalWhy it matters
Wipe the caddyMonthlyCrumbs and fingerprints build up. A dry cloth keeps it tidy.
Check screws and jointsTwice a yearWood and metal shift. A snug turn stops wobble.
Check adhesive or screws on wall holdersTwice a yearAdhesive weakens with heat and age. Retighten or replace.
Clean the rotating baseQuarterlyCrumbs stiffen the bearing. A wipe frees it.
Sort remotes and batteriesTwice a yearOld remotes and dead batteries clutter the caddy. Clear them out.

FAQ

Frequently Asked Questions

How many remotes should a caddy hold?

Count all the remotes you use, including streaming, soundbar and fan remotes. Most living rooms need space for four to six.

How much does a remote caddy cost?

Prices move, so check the current listing. The DRASTAR and FINTIE sit at the lower tiers and the GIGIFTREE at the top. Size and material drive cost.

Will a caddy scratch my coffee table?

Wood and metal bases can. Leather, felt or rubber feet protect glass and polished wood, so add pads if needed, and lift the caddy rather than dragging it across the surface when you clean the table.

Do wall-mounted remote holders stay up?

On smooth clean walls with firm pressure, yes. On textured walls, use screws. Heat and humidity weaken adhesive over time, so a holder above a radiator or in a steamy room is more likely to peel, and a quick check every season avoids a sudden drop in the middle of a film.

Can a caddy hold other items?

Many hold phones, glasses and pens, and the GIGIFTREE has a tablet slot. Keep the weight modest so the caddy stays stable.

Where should I put the caddy?

Where you sit, within one arm reach. A central coffee table or the arm side of the sofa works best. Keep it away from the edge where a child, a pet or a stretching arm can knock it off, and avoid placing it where a drink is likely to be set down beside it.

Bottom line

The short version

Browse more remote control caddieson Amazon →
Elena Hart, Lead Home Editor

About the author

Elena Hart

Lead Home Editor, SweetLivingRoom

Elena Hart leads SweetLivingRoom's buying guides, turning product dimensions, material specs and owner feedback into clear verdicts on sofas, rugs, lighting, storage and decor.

More from Elena →