Audio-Technica builds the AT-LP60X as a fully automatic belt-drive turntable with two speeds, 33 1/3 and 45 RPM. At the press of a button, the tonearm lifts, moves to the record and cues, then returns when the side ends. The built-in preamp lets it plug into powered speakers or a standard receiver without a separate phono stage.
The tradeoff is that the tonearm and cartridge are fixed and the plastic build is light, so the deck suits starting out rather than long-term upgrades. Compared with the AT-LP120XUSB, it is simpler and quieter in operation but has no pitch control or USB output. Against the Sony PS-LX3BT, it needs wired speakers instead of Bluetooth.
Set it on a level, solid surface away from the speakers so vibration does not feed back into the needle. Clean records with a carbon brush before each play. In year three, expect to replace the stylus, which wears with play time, and check the belt for stretching if speed drifts. Keep the dust cover closed during play to reduce dust.
What works
- Fully automatic cueing lifts, places and returns the tonearm for you
- Belt drive isolates the platter from motor vibration
- A built-in preamp connects directly to powered speakers
- Two speeds cover standard albums and 45 RPM singles
Watch out for
- A fixed tonearm and cartridge limit upgrades
- Light plastic body is more sensitive to vibration
Specs
- Drive
- Belt drive
- Operation
- Fully automatic
- Speeds
- 33 1/3 and 45 RPM
- Output
- Stereo, with built-in phono preamp
- Cost tier
- Upper middle of the group






