Seaside Village sells a set of two medium drum shades measuring 11.6 inches across the top, 12.6 inches across the bottom and 9.8 inches high, with a spider fitter, a 0.43 inch screw thread and fabric on the outside over a thick polyethylene lining. A slight taper, where the bottom is a little wider than the top, gives the drum a softer shape than a straight cylinder and spreads the light more evenly onto a table.
A spider fitter rests on the lamp's harp and is held by the finial, so your lamp needs a harp or a bulb clip adapter. The tradeoff is that the shade ships flat-rolled to prevent dents, which means a little assembly, and a polyethylene lining gives a firm shape but is less breathable than lined cotton. Against the Bell, the drum is more upright and uniform. Against the barrel shades, it is larger and suits a bigger base.
Measure your lamp base first: a good rule is that the bottom diameter of the shade should be about twice the width of the base, and the shade height about two thirds the lamp height. Unroll the shade, seat it on the harp and fit the finial. Check that the shade sits level and clear of the bulb. Use LEDs, which stay cool, and keep the shade a few inches from the bulb. Dust with a lint roller.
What works
- A tapered 11.6 by 12.6 by 9.8 inch drum suits medium table lamps
- A set of two gives matching shades for a pair of lamps
- A thick polyethylene lining holds the shape and resists dents
- Stated thread diameter helps you check the fitting before buying
Watch out for
- A spider fitter needs a harp or a bulb clip adapter on your lamp
- The lining is firm but not as breathable as lined cotton
Specs
- Pack
- 2 shades
- Shape
- Drum, medium
- Dimensions
- 11.6 in top by 12.6 in bottom by 9.8 in high
- Fitter
- Spider, screw thread diameter 0.43 in
- Make
- Fabric outside with a thick polyethylene lining




